Click
on a link to download the drawing in PDF format.
Drawings are available dimensioned in inches or millimeters.
640
Series
| 2-Slot Bars (Motion Frame) |
|
| 3-Slot Bars (Motion Frame) |
|
| Mounting Block |
|
| "Y" Ball-screw Bearing Brackets |
|
| NEMA 23 Motor Mount |
|
| "Y" Linear Bearings |
|
|
|
The Motion
Module consists of XX
parts:
This List is still under construction
Frame
(2) 2-slot Bars
(2) 3-Slot Bars
(2) 2 Flat-Face Bars (gantry)
(16) Corner Brackets (attaches Motion frame to Cube frame)
(16) xXy Weld Nuts
(16) xXy BHCS (Button Head Cap Screws)
X Axis
(1) "X" Motor Mount - in gantry
(1) "X" Ballscrew - in gantry
(1) "X" Tail Bearing Mount - in gantry
(2) "Y" Linear Bearing Supports
(2) "Y" Linear Bearing Rails
(4) "Y" Linear Bearings
(2) "Y" Motor Mounts
(4) "Y" Mounting Blocks
(4) "Y" Ball-screw Bearing Supports
All attached to the 3-Slot Bars
(1) "Z" Faceplate
(1) "Z" Ball-screw
(4) "Z" "V" Wheels
2
I have linked to Fastenal for the bolts, since they list cross
reference info to multiple international standards for hardware.
The four "Series" are derived from the four likeliest methods of
construction
"610" is a 600mm cube made with 1 inch T-Slot extrusion
"615" is a 600mm cube made with 1.5 inch T-Slot extrusion
"625" is a 600mm cube made with 25mm T-Slot extrusion
"640" is a 600mm cube made with 40mm T-Slot extrusion
The aim is to place minimal limitations on what material can be used,
while still ensuring inter-operability between designs. |
